1. Introduction:
High-mast lighting is a tall pole with lighting attached to the top pointing towards the ground, usually but not always used to light a highway or recreational field. The pole that the lighting is mounted on is generally at least 30 meters tall, while the lighting consists of a luminaire ring surrounding the pole with one or several independent lighting fixtures mounted around it.
We provide High Mast Lighting Poles with every shape are tailor made to our customer's requirements. The high mast lighting height from 15m to 30M, even higher, the Masts shall be continuously tapered of polygonal cross section, presenting good visual appearance. Masts are often made to suit clients' particular requirements.
2. Usage:
1). Outdoor Yard lighting, Area lighting, Petro-chemical plant, Truck and bus Terminal
2). Railway yards/Ship docks/Airports/Prisons/Parking lots
3). Industrial and commercial sites
4). Overhead Power Transmission/Monopole
5). Telecom antenna mounting, Camera mounting
6). Signage for Petrol Pump
7). Telescopic Tilting Mast
3. Specification
1). Material steel: Chinese steel Q235, Q345, Stainless pipe or other material
2). Finishing: Hot DIP galvanizing with zinc coat thickness 86 microns or Powder coating
3) Shape: Tapered and non-tapered, octagonal, polygonal and round
4) Height: 30M, or as per client requirement
5) Length: Within 14 meters once forming without slip joint.
6) Thickness of bending plate: 2.5mm-10mm
7). Safety: 2.0 or as per design
8). Head Frame point suspension type better for balancing of Lantern Ring
9). Aerodynamic shape and mechanically strong to face wind speed up to 180 km/h.
10). Easiest to install as base is identical from all direction and available in direction and available in direct grouting type and Base Plate bolted type
11). Robust Door opening and locking system increase life of internal accessories
4. Term:
1) 30% T/T in advance, balance before shipment or by L/C.
2) Delivery time: Depeonds on the quantity, usually is 12days.
Â
Contact: | Nancy |
Mobile: | +8615252575480 |
1. Introduction:
High-mast lighting is a tall pole with lighting attached to the top pointing towards the ground, usually but not always used to light a highway or recreational field. The pole that the lighting is mounted on is generally at least 30 meters tall, while the lighting consists of a luminaire ring surrounding the pole with one or several independent lighting fixtures mounted around it.
We provide High Mast Lighting Poles with every shape are tailor made to our customer's requirements. The high mast lighting height from 15m to 30M, even higher, the Masts shall be continuously tapered of polygonal cross section, presenting good visual appearance. Masts are often made to suit clients' particular requirements.
2. Usage:
1). Outdoor Yard lighting, Area lighting, Petro-chemical plant, Truck and bus Terminal
2). Railway yards/Ship docks/Airports/Prisons/Parking lots
3). Industrial and commercial sites
4). Overhead Power Transmission/Monopole
5). Telecom antenna mounting, Camera mounting
6). Signage for Petrol Pump
7). Telescopic Tilting Mast
3. Specification
1). Material steel: Chinese steel Q235, Q345, Stainless pipe or other material
2). Finishing: Hot DIP galvanizing with zinc coat thickness 86 microns or Powder coating
3) Shape: Tapered and non-tapered, octagonal, polygonal and round
4) Height: 30M, or as per client requirement
5) Length: Within 14 meters once forming without slip joint.
6) Thickness of bending plate: 2.5mm-10mm
7). Safety: 2.0 or as per design
8). Head Frame point suspension type better for balancing of Lantern Ring
9). Aerodynamic shape and mechanically strong to face wind speed up to 180 km/h.
10). Easiest to install as base is identical from all direction and available in direction and available in direct grouting type and Base Plate bolted type
11). Robust Door opening and locking system increase life of internal accessories
4. Term:
1) 30% T/T in advance, balance before shipment or by L/C.
2) Delivery time: Depeonds on the quantity, usually is 12days.
Â
Contact: | Nancy |
Mobile: | +8615252575480 |
Tobacco control has been a common global concern, while the traditional tobacco industry gradually, new tobacco has become the new strategic layout of tobacco giants. In this context, the emergence of e-cigarettes has further led to the replacement of traditional tobacco. At present, there are already a thousand different types of e-cigarettes, which have undergone several stages of development. The e-cigarette we are introducing today is the CBD pod systewm, a new type of e-cigarette. In this article we will combine the characteristics of the CBD with a brief analysis of it.
·Anti-anxiety
According to scientific studies,CBD can help depressed patients reduce their anxiety. The use of CBD can help maintain endogenous cannabinoids at a reasonable level, making the patient feel good and happy physically, and without any dependence.
·Anti-ageing
CBD is very powerful in anti-ageing. As a non-psychoactive component of the cannabis plant CBD inhibits the glutamate toxic response of cortical neurons and suppresses excessive oxidative stress, helping the body to achieve anti-ageing effects.
·Anti-inflammatory
CBD reduces the free radicals that cause neurodegenerative diseases and reduces swelling through its anti-inflammatory effects. In addition, CBD stimulates appetite and relieves pain.
China Disposble Vape Pen,E-Cigarette Cbd Vaporizer,Best Disposable Cbd Vape Pen,Disposable Cbd Vape
Shenzhen MASON VAP Technology Co., Ltd. , https://www.disposablevapepenfactory.com