In the process of using the LED transparent screen, after a long time, the product will inevitably require irregular maintenance. Many people are very unfamiliar with the concept of LED transparent screens, but at present, LED transparent screens have been gradually used in high-end office buildings, commercial complexes, shop windows and other places in the city center. So, how to maintain the LED transparent screen? In the process of daily maintenance of the LED transparent screen, the following points need to be paid attention to:
1. Keep the power supply stable, and the grounding protection is good, try not to use it in harsh natural environments! (Such as strong thunder and lightning weather);
2. It is strictly prohibited to enter water, iron powder and other easily conductive metal objects in the screen. The transparent led display should be placed in a low dust environment as much as possible. Large dust will affect the display effect, and too much dust will cause damage to the circuit;
3. If water enters due to various reasons, please cut off the power immediately and contact the maintenance personnel until the display board in the screen is dry before use;
4. If there is dust on the surface, please separate it from vacuum cleaners and air gun facilities (do not use rags, etc. to wipe directly, and do not use force to prevent the screen from falling off);
5. For normal maintenance, use vacuum cleaners and air guns to remove dust. Do not use too hard or rough cloth or dirty cloth to wipe to prevent damage to the product surface;
6. It is recommended that the LED display has a rest time of more than 2 hours per day, and the LED display should be used at least once a week during the rainy season. Generally, turn on the screen at least once a month and light it for more than 2 hours;
7. The led display screen needs to be regularly checked whether it is working properly and whether the line is damaged. If it does not work, it should be replaced in time, and the line should be repaired or replaced in time if it is damaged;
8. Don't stay in full yellow, full red, full green and other full bright screens for a long time during playback, so as to avoid excessive current, excessive heating of the power cord, damage to the LED light, and affect the service life of the display. Do not disassemble or splice the screen at will;
9. If the internal circuit of the led display is faulty, non-professionals are prohibited from touching it, so as to avoid electric shock or damage to the circuit; if there is a problem, please professional personnel to repair it.
In addition, the daily maintenance of the LED transparent screen is also very important. Regularly clean the dust accumulated on the screen to avoid affecting the heat dissipation function. When playing advertising content, try not to stay in all white, all green, etc. for a long time, so as not to cause current amplification, cable heating and short-circuit faults. When playing festivals at night, the brightness of the screen can be adjusted according to the brightness of the environment, which not only saves energy, but also prolongs the life of the LED display.
Innosilicon Machine:Innosilicon A10 ETHMaster (500Mh),Innosilicon A10 Pro ETH (500Mh),Innosilicon A10 Pro+ ETH (750Mh),Innosilicon A11 Pro ETH (1500Mh)
Innosilicon is a worldwide one-stop provider of high-speed mixed signal IPs and ASIC customization with leading market shares in Asian-Pacific market for 10 consecutive years. Its IP has enabled billions of SoC's to enter mass production, covering nodes from 180nm to 5nm across the world`s foundries including: GlobalFoundries, TSMC, Samsung, SMIC, UMC and others. Backed by its 14 years of technical expertise in developing cutting-edge IPs and ASIC products, Innosilicon has assisted our valued partners including AMD, Microchip and Microsoft to name but a few, in realizing their product goals.
Innosilicon team is fully devoted to providing the world's most advanced IP and ASIC technologies, and has achieved stellar results. In 2018, Innosilicon was the first in the world to reach mass production of the performance-leading GDDR6 interface in our cryptographic GPU product. In 2019, Innosilicon announced the availability of the HDMI v2.1 IP supporting 4K/8K displays as well as our 32Gbps SerDes PHY. In 2020, we launched the INNOLINK Chiplet which allows massive amounts of low-latency data to pass seamlessly between smaller chips as if they were all on the same bus. With a wide range of performance leading IP in multiple FinFET processes and 22nm planar processes all entering mass production, Innosilicon's remarkable innovation capabilities have been proven in fields such as: high-performance computing, high-bandwidth memory, encrypted computing, AI cloud computing, and low-power IoT.
Innosilicon Machine,A11 Pro 1500M Miner,Asic Miner A11 Pro 8G,A11 Pro 8G 1500Mh,ETC miner
Shenzhen YLHM Technology Co., Ltd. , https://www.ylhm-tech.com