Based on PSpice, a UC2843-based boost switching power supply circuit design

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin
TP-IP4220CZ6 5V 0.35PF breakdown voltage 6V SOT
Shunuo varistor / ESD varistor / product complete / Sunlord first-class agent

description:

In the 1950s, NASA developed a switching power supply for rockets with the goal of miniaturization and light weight. In the development process of more than half a century, switching power supply has gradually replaced the continuous working linear power supply designed and manufactured by traditional technology due to its small size, light weight, high efficiency, low heat generation and stable performance. In electronic and electrical equipment. In the 1980s, the computer fully realized the switching power supply, and took the lead in completing the power conversion of the computer. In the 1990s, switching power supplies were widely used in the fields of electronics, electrical equipment, and home appliances, and switching power supply technology entered a period of rapid development.

Cadence's PSpice is a circuit simulation software that simulates complex analog-to-digital hybrid circuits, and switching power supplies are no exception.

The appendix is ​​the application circuit, see the PDF document for more details!

USB Countdown Timer Socket

Function description

The socket is ordinary converter,with two output 5V2A power USB power supply at the same time,can be very convenient in use electrical appliances and recharge the equipment at the same time,such as digital products like Iphone Ipad,MP3,MP4 etc.The charge apply to full range of international AC output,no-load power consumption less than 0.3W,with short circuit,overload,over-voltage protection,can be convenient for your life and save more energy

Timer Control Time Adgustment

1.Press the power switch 1 time,the 1HOUR LED will light on.The Timer into ON mode,USB and control socket output ON .

2.Continuously press the power switch the LED light on,the Countdown mode and LED light on will cycle change from 1HR,2HR,4HR,6HR,8HR,10HR.

3.Choose you need countdown time mode,the mode LED will lighto on,start countdown until countdown time finish,the control output and USB change to OFF

4.Then the countdown is start,The Time indicate LED will from high to low auto change until Countdown finish off.

Failure analysis:

1.check whether the power supply connection is good

2.check whether the USB cable is loosen

Warning Note:

1.Use indoor and dry location ONLY

2.The load max does not exceed 15A 3600W

3.This product does not convert voltage please do not miss use DO NOT exceed the maximum loading of 3600 Watts 15A

4.Always have earth connection for safety reason

5.If in doubt please consult with a qualified electrician

USB Countdown Timer, USB Countdown Timer Socket, USB Timer, USB Charger Timer, USB Timer Socket

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com

Posted on