The characteristics and experimental rules of Yuanmu Bio elisa kit
The company's long-term supply: elisa kits, biological reagents and other scientific research products, but also a professional technical guidance and after-sales service team to meet the growing needs of human life science research, and promote social development.
The ELISA test is a highly sensitive, specific, and reproducible experimental diagnostic method. Because of its stable reagents, easy storage, easy operation, and objective judgment, it has been widely used in various fields of immunology.
Experimental rules for ELISA kits:
1. When adding liquid to the pores of the enzyme, avoid contact between the nozzle and the liquid in the hole, so that the droplets on the tip of the gun can be in contact with the wall of the hole, and the droplet will naturally flow down.
2. After all the liquids have been added, the enzyme plate can be gently shaken on the table for 30 seconds to mix the liquid. It is also possible to use the shaking function of the microplate reader.
3. When warming the bath, seal the enzyme plate with self-adhesive or tape paper to prevent evaporation of water.
4. When washing the plate, each time the washing solution is added, it should be allowed to stand for 1 minute to make the washing more thorough. When there is no washing machine, after pouring the liquid, the ELISA plate should be patted dry on the newspaper or paper.
5. When the washing liquid is not enough, you can prepare PH7.4, 0.02M phosphate buffer solution by using distilled water, and add 0.1% Tween 6 as the washing solution in the ELISA kit. It can be stored for a long time after adding 1/1000 sodium azide.
Industrial Main Board Cable:SCSI,D-SUB,DVI,Wire to Wire ,RJ45...
There are five types of main board power line interface, and different external devices correspond to different interfaces. Different interfaces and their connecting pins are also different. For example, the pin of the main power supply is 24 pins, and the hard disk drive is 5 pins.
1. 20pin + 4Pin interface: it is a common interface combination, in which 20pin is the main power interface and 4Pin is the auxiliary power supply interface.
2. 5pinsata interface: special interface for power supply of hard disk and optical drive.
3. 6pin? PCI? Express connector: a special interface for independent graphics power supply.
4. 4Pin connector: it is a kind of floppy disk power connector, which is used to power the floppy drive equipment.
5. 4Pin power interface: optical drive, old IDE hard disk and peripheral hardware power supply interface.
Industrial Main Board Cable
ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com