Common LED package use elements
First, LED pin forming method
1. It is necessary to 2 mm from the gel to bend the bracket.
2. Bracket forming must be done with a clamp or by a professional.
3. Bracket forming must be completed before welding.
4. Bracket forming must ensure that the pins and spacing are consistent with the board.
Second, pay attention to LED bending feet and cutting feet
Because the design requires bending and cutting the foot, when bending and cutting the LED, the position of the bending foot and the cutting foot is more than 3 mm from the bottom surface of the gel.
The bent feet should be made before welding. When using the LED plug-in lamp, the pitch of the pcb board hole corresponds to the LED pin pitch. When cutting the foot, the static vibration of the cutting machine generates a high voltage static electricity, so the machine should be grounded reliably and do anti-static work (the ion fan can be blown to eliminate static electricity).
Third, LED cleaning
Special care must be taken when cleaning the gel with chemicals, as some chemicals damage the surface of the gel and cause fading such as trichloroethylene, acetone, and the like. It can be wiped and immersed in ethanol for less than 3 minutes at room temperature.
Fourth, LED overcurrent protection
Overcurrent protection can be used to connect the LED series protection resistor to make it work stable. The formula is: R=(VCC-VF)/IF
VCC is the power supply | voltage regulator voltage, VF is the LED driving voltage, IF is the forward current
Five, LED welding conditions
1. Soldering iron soldering: The soldering iron (up to 30W) tip temperature does not exceed 300 ° C, the soldering time does not exceed 3 seconds, and the soldering position is at least 2 mm from the colloid.
2. Wave soldering: The maximum temperature of dip soldering is 260 ° C, the dip soldering time is less than 5 seconds, and the dip soldering position is at least 2 mm from the colloid.
Anti-blue Light Protective Film is a product developed based on reducing the harm of blue light to people. Compared with the emerging screen protectors on the market, in addition to anti-fingerprint, anti-scratch and other functions, the most distinctive function of anti-blue light screen protectors is blue light blocking. By absorbing and converting the blue light emitted from light sources such as mobile phones, computers, TVs, and LED lights, the anti-blue light protective film can greatly reduce the irritation of blue light to the eyes and control the deepening of myopia; in addition to preventing myopia, the anti-blue light protective film can also prevent myopia Absorption and conversion of ultraviolet rays to prevent skin dryness caused by ultraviolet reflection, resulting in skin pigmentation, chloasma and other problems.
All in all, blue light is indeed harmful to our eyes, but the Anti-blue Light Screen Protector can play a role in filtering blue light. As for the pots with visual fatigue and visual impairment, the blue light cannot be completely ignored. The best way is to try to control the time of playing with the mobile phone as much as possible. In daily life, we should learn to use our eyes reasonably and appropriately, which is the best way to prevent blue light and protect our eyesight.
Not only the use of mobile phones, but also when we use computers and watch TV for a long time, we should also use our eyes moderately, and look into the distance for a while every 20 minutes, so that our eyes can get enough rest. In addition, turning on the night mode on mobile phones and computers is also a feasible preventive plan.
Anti-Blue Light Screen Protector,Flexible Anti-Blue Light Film,Anti-Glare Blue Light Filter Screen Protector,Eye Protection Hydrogel Screen Protector
Shenzhen TUOLI Electronic Technology Co., Ltd. , https://www.szhydrogelprotector.com