Guangdong Province to promote LED lighting products quality enterprises will receive 10 billion yuan financing credit

LED output value of Guangdong Province is expected to reach 210 billion yuan this year.
The promotion of LED lighting products is the highlight of the 2012 China (Dongguan) International Science and Technology Cooperation Week. On November 1, the Guangdong LED Lighting Product Promotion Summit, co-sponsored by Guangdong Science and Technology Department and Industrial Bank, was held in Dongguan.

Ye Jingtu, deputy director of the Guangdong Provincial Department of Science and Technology, introduced the development of the LED industry in Guangdong Province. He said that last year, Guangdong's LED output value reached 151.5 billion yuan, and this year it continued to maintain a relatively high growth rate, which is expected to reach about 210 billion yuan.

“Product application is a key link in the activation of the product market. It is also an important measure for Guangdong to achieve energy conservation and emission reduction and promote technology to benefit the people.” Ye Jingtu introduced that in May this year, the Guangdong Provincial Government held a conference on promoting LED lighting in the province, and proposed 3 During the year, the LED lighting renovation in the public sector of Guangdong Province was completed, and the LED output value reached 500 billion yuan.

Under the unified deployment of Guangdong Province, up to now, Guangdong Province has completed the bidding and installation of 120,000 LED outdoor lighting fixtures and 300,000 indoor lighting products to promote the promotion and application of LED lighting products.

Create a Pearl River Delta International LED Industry Cluster
At the meeting, Guangdong Science and Technology Department and Industrial Bank Guangzhou Branch signed a comprehensive cooperation agreement and special cooperation agreement for LED lighting products promotion in Guangdong Province. According to the agreement, Industrial Bank will provide a total of 10 billion yuan of special financing services to high-quality enterprises in the qualified LED industry chain in Guangdong Province on the premise of meeting the requirements of the China Banking Regulatory Commission and the bank's internal approval requirements. The credits include energy-saving service companies engaged in technological innovation in contract energy management mode or other modes, manufacturers and suppliers of lighting products, and owners who have financial needs due to participation in government procurement.

Ye Jingtu introduced that in the promotion of LED lighting products, Guangdong Province will focus on building a system of integration of technology, industrial capital and financial capital, and strive to build an international LED industry cluster in the Pearl River Delta region. "This is a crucial period for the next two years. I hope that all cities in Guangdong will implement the relevant requirements of the Guangdong Provincial Government," Ye Jingtu said.

It is estimated that the LED output value of Dongguan this year is about 15 billion yuan.
Liang Guoying, executive deputy mayor of Dongguan City, said that under the unified deployment of Guangdong Province, Dongguan LED lighting promotion and application has made great progress. Up to now, Dongguan has completed the installation and renovation of 43,000 LED street lights and 112,000 LED indoor lamps. At present, there are 160 enterprises engaged in LED R&D and production applications in Dongguan. The leading companies in the industry such as Optoelectronics, China Gallium Semiconductor, Diguang Electronics, and Kage Precision have emerged, forming a complete system from substrate materials to chips to packaging and application testing. The industrial chain plays an important role in the domestic semiconductor lighting industry. It is estimated that the LED output value of Dongguan in 2012 will reach 15 billion yuan, an increase of 35% over last year.

2 Rates Power Meter Socket

Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.

Installing the batteries

Install 3.6V rechargeable Battcrics(NI-MH) . The purpose of the batteries is to store the total electricity and mcinory setting.

Resetting

If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,press the RESET button.

Display Mode

Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from one mode to the other, press the FUNCTION button.

Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutcs (2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours) and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will rc-caculatc. LCD on second line displays current power which ranges in 0.0W~9999W. LCD on third line displays the current electricity costs which ranges in 0.0cost~9999cost. It will keep on O.OOcost before setting rate without other figures.

Mode 2: l ime/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.

LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:0() again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000K WH 〜 9999KWII without other figures. LCD on third line displays''DAY''- "1 "will be showed on numerical part(thc other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untial the maximal cumulative time of 9999 days.

Mode 3: Time/Voltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V~9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ~9999HZ without other figures.

Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.

LCD on second line displays load current which ranges in 0.0000A~9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 1 .OOPF without other figures.

Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 clones. LCD on second line displays the miniinum power which ranges in 0.0W~9999W. LCD on third line displays character of "Lo" without other figures.

Mode 6: I,ime/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W~9999W. LCD on third line displays character of "Hi" without other figures.

Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line displays the"O VER LOAD" with booming noise to warn the users,( 1918935, 60470643, 60469303,selectable choice)
Supplemental informations:
1: Except tt OVERLOAD , ' interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third line described in this intruction take section according to two black lines on LCD screen. Here it added fbr clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&''Down" are in no function under un-setting mode.
Backlight Mode:
Connect to AC power,backlight im mediately light,if not press any button,backlight will went off in 15 seconds.
When press any of the buttonsbacklight start light again. (Backlight only light when it connect to AC power,backlight cannot light if use battery)
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting more than 3 seconds(LCD on third line display system defaults price, eg O.OOCOST/KWH ),the rendered content begins moving up and down which means that the device has entered the setting mode. Then press FUNCTION button to change selection and press UP/DOWN to set what you want. (On pressing once, the figure after domical point will increase or decrease accordingly. On pressing and hold-on, figures after demical point will increase or decrease slowly in 2 seconds while figures change quickly when hold-on time exceeds 2 seconds. When hold-on time reaches 10 seconds or more, the figures after demical point will stop while the figures before demical point begin to increasing or decreasing.) After that, press FUNCTION fbr swithing, then press [UP'nd "DOWN" button again to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After setting all above, press COST to return to Mode7 or it will automatically return to Mode7 without any pressing after setting with data storage.

Power Meter Double Rates, Power Meter Two Rates, Cost Rate Socket, Power Meter Cost Rate, Energy Meter Cost Rate, Cost Socket, Cost Plug

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com

Posted on