Household refrigerator ultra-utility power-saving Raiders this wave operation 666!

Every household's refrigerator is running 24 hours a day, and watching the monthly electricity bills looks sad. Although the refrigerator is working all the time, some refrigerators will cause "stealing electricity" because of various reasons.

Is your refrigerator "stealing electricity"?

[Test seal with A4 paper]

When you choose a refrigerator, you will often be influenced by factors such as style, size, and power. One thing is more important than these, that is, the refrigerator seal. The quality of the refrigerator sealing ring will directly affect the sealing performance, heat preservation, cooling effect and service life of the refrigerator.

Refrigerators that have been used for many years often have a much lower cooling capacity because of the old seals, and they also cost electricity. Use a piece of A4 paper to test if the seal is tight. Clamp the A4 paper on the door slit of the refrigerator and pull the A4 paper slightly. If the refrigerator is in good condition, the paper will be clamped. If you can easily pull the paper out, then change the refrigerator.

[Freezing and refrigerating separately set the temperature]

The temperature of the refrigerator is also very important for power saving. If the temperature is too high or too low, the power will be wasted.

The temperatures required for the frozen layer and the fresh layer need to be set separately. The thermometers were placed in the freezer and freezer of the refrigerator to test the temperature. Then adjust the temperature separately to maintain the temperature of the freezer between -7 and -8; the freezer is maintained between 6 and 7.

[Frozen bowl of water to cool down]

This method is super simple, as long as a bowl of tap water can save a lot of electricity. After freezing the water into ice, the temperature of the ice is used to lower the temperature of the refrigerator. Such a magical and easy to use method, try it.

Step 1: Prepare a bowl filled with water.

Step 2: Put the fresh water in the freezer layer and freeze it overnight.

Step 3: Remove the frozen water and put it in the refrigerator. You can use the refrigerator with confidence.

[Using plastic wrap to save power]

The plastic wrap at home, what do you usually use? Fresh food, weight loss, masking... In fact, a small plastic wrap can also save power in the refrigerator.

When storing food, usually wrap the food with a plastic wrap or a crisper, or cut the food into small pieces to increase its surface area and put it in the refrigerator. This can save a lot of electricity.

The meat that needs to be cooked can be chopped in advance and placed in the refrigerator. Be careful to flatten the meat as much as possible, which will increase the surface area and better cooling to save electricity.

Fruit preserved can be cut into pieces and placed in a crisper. This will save more power than putting the entire fruit directly into the refrigerator.

[Use a napkin to reduce frosting]

The refrigerator has been used for many years and there will be frost inside. Studies have shown that the more frosting, the worse the refrigerator is, in other words, frosting will make the refrigerator more and more power-consuming. The reason for frosting is caused by water vapor in the refrigerator. It can be seen that reducing food vapor is an essential step for saving electricity.

In fact, a napkin can help you solve the frosting troubles. When preserving vegetables, wrap the vegetables in a napkin and put them in a crisper to protect the water from evaporation. You don't have to worry about frosting in the refrigerator.

[take out food in advance]

For some ingredients that are cooked on the same day, they can be taken out of the freezer in advance and placed in the cold room. Because the refrigerating room consumes less electricity than the freezer, such a "caution machine" can not only thaw food in advance, but also save electricity.

[Reducing the number of times the refrigerator is opened]

Frequent switching of the refrigerator door will allow hot air to continuously enter the refrigerator. This requires the refrigerator compressor to run several times, which is very power-hungry. Therefore, when cooking, you can take all the ingredients at one time and reduce the number of times the refrigerator is opened.

[Storage the right amount of food]

The refrigerator is not a storage cabinet. If you want to install anything, you will rush into it. The food in the refrigerator should not be placed too much or too little, generally seven or eight minutes full of electricity. Square-packed foods should not be filled, because the stored foods should have a certain gap between them to facilitate air circulation.

[away from heat source]

Keep the refrigerator away from heat sources and avoid direct sunlight and ventilation. Putting things together with overheating will increase power consumption due to the increase in temperature. When placing the refrigerator, finally leave a position on the left and right sides and back to facilitate heat dissipation.

[Superheated food first cools]

Before putting hot vegetables and hot water into the refrigerator, they can be cooled first. The overheated food will increase the temperature inside the refrigerator, and the evaporated water vapor will also increase the frost, which will cause the refrigerator to consume more electricity.

6 In 1 Docking Station

Support six ports to use at the same time, PD interface projection screen without power, screen projection, transmission, play while charging a draft.

6 in 1 docking station, USB c HUB 6 port type c hub, USB C Hub 6 in 1 with HDMI USB3.0 USB2.0, 6 port multifunction Docking Station

Shenzhen Kingwire Electronics Co., Ltd. , https://www.kingwires.com

Posted on