In general, high pressure blowers have the following characteristics:
1. It has double function of blowing and sucking, and it can be used for both air and air. There is a high pressure blower of 4QB series of beams and beams. It can also use suction and air blow at the same time, which is equivalent to the function of rotary vane vacuum pump. ;
2, less oil or no oil operation, the output air is clean;
3, compared with the centrifugal fan and the medium pressure fan, the pressure is much higher, often more than ten times that of the centrifugal fan, and the current maximum pressure is up to 230KPA;
4. If the pump body is integrally die-cast and the shock-proof mounting foot is used, its requirements for the installation base are also very low. It can even operate normally without fixing the foot. It is very convenient and saves installation costs. And installation cycle;
5, compared with other types of fans, such as beam blower, its operating noise is lower, the greater the power, the more obvious, more than 5.5KW will be displayed;
6, maintenance-free use; its loss parts are only two bearings, within the warranty period, basically no maintenance;
7. The mechanical wear of the high-pressure blower is very small, because there is no other mechanical contact part except the bearing, so the service life is of course very long. As long as it is under normal use conditions, there is no problem for 3 to 5 years. of. This is also the biggest reason for the popularity of high-pressure fans.
1. It has double function of blowing and sucking, and it can be used for both air and air. There is a high pressure blower of 4QB series of beams and beams. It can also use suction and air blow at the same time, which is equivalent to the function of rotary vane vacuum pump. ;
2, less oil or no oil operation, the output air is clean;
3, compared with the centrifugal fan and the medium pressure fan, the pressure is much higher, often more than ten times that of the centrifugal fan, and the current maximum pressure is up to 230KPA;
4. If the pump body is integrally die-cast and the shock-proof mounting foot is used, its requirements for the installation base are also very low. It can even operate normally without fixing the foot. It is very convenient and saves installation costs. And installation cycle;
5, compared with other types of fans, such as beam blower, its operating noise is lower, the greater the power, the more obvious, more than 5.5KW will be displayed;
6, maintenance-free use; its loss parts are only two bearings, within the warranty period, basically no maintenance;
7. The mechanical wear of the high-pressure blower is very small, because there is no other mechanical contact part except the bearing, so the service life is of course very long. As long as it is under normal use conditions, there is no problem for 3 to 5 years. of. This is also the biggest reason for the popularity of high-pressure fans.
Dc Solar Pump,Solar Centrifugal Pump,Surface Centrifugal Pump ,Dc Solar Water Pumps
Wuxi Doton Power , https://www.dotonpower.com