Nowadays, few young people will go to see radio and television cable. Even if the home is not a smart TV, it will use the "Android box" to realize the Internet TV function so as to watch on-demand and live content. More than 100,000 movies and TV drama resources are watched.
Speaking of the Android box, it is now getting smaller and smaller, like the Xiaomi box and the Huawei glory box. It is only a single charger and never needs to be plugged into the socket. And you may not think that this kind of long-lost Android box is the culprit in your home's electricity bill.
Wireless router power consumption measured: At present, everyone has WiFi, and wireless routers are basically run 24 hours a year, mobile phones, tablets, computers and televisions rely on it. Even if it is a 24-hour standby device, the standby power consumption is only 1.94W.
Non-smart TV power consumption measured: A 55-inch LCD TV was tested, which was in the off standby state. As can be seen from the picture, the standby power consumption of the measured television is only 0.60W.
Android box power consumption measured: As with the TV, for Android box, everyone used to use the remote control to close, the plug will not be unplugged. But don't underestimate this small Android box, which actually has a standby power consumption of 4.84W, which is 7 times that of a TV and 2.5 times that of a wireless router.
Therefore, when not using an Android box, it is recommended to unplug the power switch or use a socket with a separate switch.
What is a Capsule Slip Ring?
Capsule slip rings are a type of electrical connector that are used to transfer power and data between two rotating objects. They are commonly used in applications where there is a need to send or receive signals from a stationary object to a rotating one, or vice versa.
How Does it Work?
Capsule slip rings work by using a series of electrical contacts that rotate with the object on which they are mounted. These contacts are spaced evenly around the circumference of the ring, and as they rotate they make and break contact with corresponding contacts on the other object. This allows power and data to be transferred between the two objects without any interruption.
Advantages of Capsule Slip Rings
There are several advantages to using capsule slip rings in place of other types of electrical connectors.
For example, the rotation of the contacts causes them to be freely accessible and therefore free from dust and debris. This makes them ideal for applications where connector maintenance is often a problem.
Because the contacts are freely accessible, they can be readily replaced if a fault occurs. They also have very low electrical resistance, making them ideal for transmitting radio frequency signals. Because of the low resistance, this type of connector is often used in high-speed data transmissions.
This type of Conductive Slip Ring is similar to the shape of a hat. The brim part is a flange with a conductive slip ring. The function of the flange is to facilitate installation. It is connected to electrical equipment through the fixing hole of the flange. It can be firmly installed on the equipment. Therefore, the stator of the cap-type slip ring is generally fixed by the outer layer with a flange, and the inner part is the rotor with the inner shaft rotating. The stator and the rotor are not fixed, and the details will be different according to the installation method.
Capsule Slip Ring,Split Ring Motor,Slip Ring Motor Connection,Slip Rings In Synchronous Motor
Dongguan Oubaibo Technology Co., Ltd. , https://www.sliproubo.com