SIA said in the report that global chip revenues in the second quarter fell 2% from the previous quarter to $59.9 billion, although sales rose by 7%. Sales revenue in June fell from $20.3 billion in May to $19.95 billion. Throughout the first half of the year, global chip sales revenue was $121 billion, compared to $118.4 billion in the same period last year.
SIA said in its report that the downward trend in product prices will have an impact on chip makers' performance, but it is really good news for consumers because all chip prices are falling. SIA President George Scariser said in the report that the most important feature of the first half of the year was the continued decline in prices. Sales of personal computers and mobile phone chips, which account for 60% of all chip consumption, have grown as expected, but prices are falling. The price of DRAM memory chips has dropped by nearly 40% year-on-year. Although the sales volume has increased by about 66%, NAND flash memory chips have similar trends. Scarisel said that there are two main reasons for the decline in the chip industry: First, the continued market share between Intel and AMD has led to a decline in the price of processors: the other is that the inventory in the hands of manufacturers is generally too high. .
On July 12 this year, after Samsung Electronics released its second-quarter results, which fell 5.6% year-on-year, market analysts condemned the decline in product prices due to oversupply of chip products, which affected the company's performance. Compared with the same period last year, the price of DRAM memory chips has dropped by nearly 40%, while the price of NAND flash chips has dropped by more than 15%. Correspondingly, the market supply of the two products increased by 66% and 40% respectively.
According to SIA, the processor chip market is relatively better than the memory chip market. Compared with the same period of last year, the price of the product dropped by less than 10%, but the shipment volume increased by about 19%.
Scariser expects that the chip market revenue will increase by 1.8% for the whole year, and the growth of several important markets will meet expectations.
1
Electric Vehicle Wiring Harness
The electric vehicle wiring harness is the blood vessel of the electric bicycle. Through this blood vessel, the power of the battery is output to the motor, control system, lighting signal system, and auxiliary system to drive and control the vehicle. The carrier of this blood vessel is the electric vehicle wiring harness. Electric vehicle wiring harnesses are divided into main wiring harnesses and branch wiring harnesses, which should be classified according to the system configuration of electric vehicles. The main wiring harness is divided into battery power supply system wiring harness, power switch wiring harness, control system main supply wiring harness; branch wiring harness is divided into lighting signal wiring harness, control system signal wiring harness, combination switch wiring harness, etc. The wiring harness of the lighting signal system can be divided into headlights, front turn signals, rear lights, rear turn signals, brake lights, license plate light harnesses, etc. Plastic connectors are generally used between the wiring harness and the wiring harness and between the wiring harness and the electronic components. Generally, manufacturers use different numbers of holes in connectors to distinguish them. Most of the main circuit harnesses of the whole vehicle are centered on the controller and extend to the front and rear of the vehicle body respectively.
As the main carrier of power output on electric vehicles, FAKRA Wiring Harness is one of the key components for the performance and safety of the entire vehicle. The requirements of electric vehicle high-voltage wiring harnesses, voltage, current, temperature, and working life , Shielding effect, flexibility, bending resistance, identification, etc. All of them are indispensable. Its wires, terminals, connectors, and other raw materials must meet environmental standards for use in order to ensure the safety of electric vehicles.
Kable-X has more than 20 years of experience With experience in the Cable Assembly, the quality of Kable-X electronic wiring harness has passed ISO9001, IATF16949, IPC620C and other certifications, and the products are exported to Japan, South Korea, the United States and other countries. Provide customers with one-stop service for automotive high-voltage wiring harness customization.
Therefore, our Vehicle Cable Assembly is recognized by our customers, and we can meet customer needs. Especially our Agricultural Machinery Navigation Wire Harness and Vehicle Air Conditioner Wire Harness.
Electric Vehicle Wire Harness,Electric Vehicle Wiring Harnesses,Electric Vehicle Wiring Harness,Power Wire Harness
Kable-X Technology (Suzhou) Co., Ltd , https://www.kable-x-tech.com