Many manufacturers are now using artificial intelligence tools to automate the design of 3D printed parts without prior 3D modeling. This means that with the addition of artificial intelligence technology, it can successfully streamline the most cumbersome and labor-intensive 3D modeling process of 3D printing technology , which can greatly shorten the design cycle and make the whole project more seamless. Efficient.
Recently, a new artificial intelligence system, Live Parts, has been developed by 3D printing company Desktop metal. This system allows users to import constraint data through local CAD programs, and then automatically design the components and automatically process the data before proceeding. 3D printing, which omits the 3D printing tasks that must be performed before the actual work.
However, like everything in life, this technology is not as good as we think it is. In fact, the two parts of this artificial intelligence system are still in the experimental stage, and are currently only open to Solidworks users.
"Live Parts uses a new method for generating sketches, to form a solid form by applying the principles and advanced analog, lightweight member." Jo nah Myerberg Desktop me tal CTO. "Live Parts Natural member is excited by the drive algorithm, these algorithms may cause parts to automatically increase and adapt to, and adjusted based on their function and the environment. It speeds up the graphics processor by a multi-physics engine driver, Live Parts in minutes The interior grows from a single configuration and automatically generates design files. This allows users to quickly realize the full potential of artificial intelligence manufacturing, including materials and cost efficiency."
When other tools simulate multiple static load conditions, Live Parts needs to consider the dynamics of the transition to accommodate the pressures that occur in the real world.
Myerberg says: "Live Parts accelerated by a multi-physics engine to drive the Live Parts provides the unique ability simulated power transition forces, such as vibration frequency and low frequency oscillation, and the member can be automatically generated in real time these members. The power to grow and adapt to these changes is just like the growth of real-world creatures in a changing environment. As a result, the pressure on these components is very uniform, material efficiency, strength, and weight."
Since Live Parts is part of the cooperation with Solidworks, CAD and CAE programs which is a widely used, currently it only supports preview in Solidworks system. And as an experimental system, if you encounter several bugs, it will have a relatively large impact on the system.
Myerberg concluded by saying: "Live Parts are actively refining and adjustment."Euroblock, short for "European-style terminal block"; is a combination of a low-voltage disconnect (or pluggable) connector and terminal block commonly used for microphones and line-level audio signals , and for control signals such as RS-232 or RS-485. It is also known as the Phoenix connector and comes from a German Phoenix Electric Company, which was established in 1981 in Harrisburg, Pennsylvania, USA. Also known as "Plug-in Terminal Blocks" or "Two-Piece Terminal Blocks".
Eurostyle Terminal Blocks,Eurostyle Terminal Blocks High Temperature,Eurostyle Terminal Blocks Kit,Eurostyle Terminal Blocks Heat Resistant
Sichuan Xinlian electronic science and technology Company , https://www.sztmlch.com