YBC
Analysis of Common Faults of Series Zinc Oxide Arrester Testers
YBC
The common faults of the series of zinc oxide arrester testers are as follows:
The instrument displays:
display
1-
Indicates that the instrument is overvoltage or not connected
It is also possible that the sample is larger than
10KV
display
2---
Abort the operation and restart.
display
3---
Said that the high pressure can not rise
It may be that the battery voltage is low and you need to retry after charging. It may also be that the sample is larger than
10KV
display
4---
Overcurrent
It may be that the sample is bad or the test voltage level is less than
6KV
display
5---
Indicates no high voltage, first shut down and restart
If it still does not work, it may be that the high voltage package is damaged. Because the high pressure package is customized, the customer needs to return the instrument to the factory for repair.
display
6---
Indicates fire protection (can hear the sound of fire)
It may be an environmental problem, wet or leaking, please restart the instrument or replace the test environment.
It may also be that the instrument is completely dead (or the battery is not charged), it is recommended to replace the battery.
Capacitor for Electric Furnace
Capacitor For Electric Furnace, commonly referred to as capacitors, are capacitors, expressed in the letter C.Definition 1: a capacitor, as the name implies, is a "charging vessel", a device that holds charge.Capacitor.Capacitors are one of the most widely used electronic components in electronic equipment. They are widely used in the fields of interleaving, coupling, bypass, filtering, tuning circuit, energy conversion and control.Definition 2: a capacitor consisting of any two conductors (including wires) that are insulated from each other and are very close together.
Components Capacitors,High Voltage Capacitors,Low Frequency Capacitor,Water Pump Capacitor,Capacitor for Electric Furnace
YANGZHOU POSITIONING TECH CO., LTD. , https://www.cndingweitech.com