Shanghai Sansi provides LED lighting for Hangzhou Metro Line 2

The length of Hangzhou Metro Line 2 is 48 kilometers. It is an important part of the Hangzhou subway backbone network and one of the main passenger flow channels connecting the two sides of the Qianjiang River. The project supplies LED lighting for the public area, equipment area and section tunnel of 13 underground stations of Hangzhou Metro Line 2. It uses Shanghai Sansi 300 LED panel light, 200 LED panel light, 150 LED panel light, 600 type. A total of more than 24,000 lamps, including square LED panel lights, LED downlights and LED spotlights.

Shanghai Sansi LED Metro Lighting Series lamps have adopted a uniquely designed surface light source structure, and successfully developed LED hidden light bead reflective surface light source lamps without glare and “seeing the light without seeing the light”. The LED lighting fixtures developed by LED use non-uniform layout array technology of LED, transparent and efficient near-end heat dissipation technology, reflection and scattering design technology, digital dimming control technology, etc., which are not only energy-saving, environmentally friendly, long-life, maintenance-free, and reach The combination of energy-saving lighting design and decoration style design has a good effect. The luminous efficacy of the lamps is over 90lm/w, and the comprehensive technology has reached the international leading level.

This series of LED lighting products was successfully applied to the comprehensive energy-saving lighting equipment project of Shenzhen Metro Line 2 (Shekou Line) in November 2010, which pioneered the use of LED lighting in the entire subway. After that, it was promoted and applied in 12 subway LED lighting projects in Shanghai, Zhengzhou, Wuxi, Hangzhou, Ningbo, Nanjing and Dongguan, and was approved by domestic subway operators.

MOSO Class II Programmable LED Driver supports 0-10V, PWM, timer step dimming or DALI control from 75W to 320W. It can reprogram the output by a software or infrared controller. Class II outdoor Driver is IP67 waterproof, with build-in surge protection. It provides a Dim-to-off mode with low standby power. MOSO Class II Programmable power uses extruded-metal housing and fully glue-potted for good dissipation.

MOSO developed Class II Programmable LED Driver series with special isolation design for global market especially for the Europe. All Class II LED Drivers are certified with CCC, CE, TUV, ENEC and CB standards.

MOSO has set several distributors in Europe, United States, Latin America, Asia and Australia. All MOSO Class II Programmable power suppliers provide 5 years global warranty. In case of any failure, customers can get replacement either from MOSO directly or any one of MOSO distributors.

MOSO always dedicates to providing professional outdoor lighting solutions. Please feel free to contact our sales team if you need any support!

Class II Programmable LED Driver

Class II Programmable LED Driver,Class II Programmable Dimmable Driver,Dim-to-off Class II Programmable Driver,Class II Programmable Outdoor LED Driver

Moso Electronics , https://www.mosoleddriver.com