Aerial Bundled Cable up to 1kv

Aerial insulated cable consists of copper or aluminum conductor, inner shielding layer, weather-poof insulation material and outer shielding layer. It has not only power-transmitting character of power cable, but strong mechanical character of aerial cable as well.

The product is manufactured according to the standards of GB14049Aerial insulated cables of rated voltages 10 KV and 35KV and IEC60502Extruded solid dielectric power cables for rated voltages from 1KV to 30KV.

10KV Rated Voltage Overhead Insulated Cable

1. Suitable use for AC rated voltage 10KV (U) or 12KV(Um) overhead power transmission lines.

2. The installation temperature should be not less than -20.

3. The maximum temperature of conductor: XLPE insulated cable is 250 when the short-circuit period should not exceed 5 seconds.

4. The maximum permissible continuous operating temperature of conductor: A. Cable with bearing structure: XLPE insulated cable is 90; B. Cable without bearing structure: Considering no stipulation in GB, it should be under above a value according to the real instance.

5. The permission bending radius is no less than: A. Of single core cable is 20(D+d) ± 5% mm, TR structure is 20Dmm; B. Of multi-core cable is 15(D+d) ± 5% mm.







  Aerial insulated cable consists of copper or aluminum conductor, inner shielding layer, weather-poof insulation material and outer shielding layer. It has not only power-transmitting character of power cable, but strong mechanical character of aerial cable as well.

The product is manufactured according to the standards of GB14049Aerial insulated cables of rated voltages 10 KV and 35KV and IEC60502Extruded solid dielectric power cables for rated voltages from 1KV to 30KV.

10KV Rated Voltage Overhead Insulated Cable

1. Suitable use for AC rated voltage 10KV (U) or 12KV(Um) overhead power transmission lines.

2. The installation temperature should be not less than -20.

3. The maximum temperature of conductor: XLPE insulated cable is 250 when the short-circuit period should not exceed 5 seconds.

4. The maximum permissible continuous operating temperature of conductor: A. Cable with bearing structure: XLPE insulated cable is 90; B. Cable without bearing structure: Considering no stipulation in GB, it should be under above a value according to the real instance.

5. The permission bending radius is no less than: A. Of single core cable is 20(D+d) ± 5% mm, TR structure is 20Dmm; B. Of multi-core cable is 15(D+d) ± 5% mm.







 

LED Flood Light

LED floor light also know as project light lamp is specified by the intensity of illumination on the cliff above the lamps and lanterns of the surrounding environment.  it can emit  any direction, use unique structure Heat dissipation and waterproof part , which can make sure the safty, stability and durability .

Led Flood Light are widely used to Landscape lighting , brige, building lighting,hotels, squares, and entertainment and many other outdoor project . Non-stanmdard made lamps , and custom led flood lamps , are our strong point compare with other outdoor lighting supplier. 8 years outdoor lighting manufactures must be your best chioce of  your lighting project .

LED Flood Light

Led Flood Light,Outdoor Flood Light,Led Projector Light,Flood Light

Shenzhen Relay Lighting Electrial Appliances Co.,Ltd , http://www.relay-lighting.com