Tender code: CBL_20161116_188953101
Bulletin category: Domestic tender
Tenderee: Jiangsu Datang International Jintan Thermal Power Co., Ltd. Source of funds: Other (Tender III) Jiangsu Datang International Jintan 2X400MW gas turbine cogeneration project secondary centralized procurement of the third batch of equipment Tender Notice
1, the basic situation
1.1 Project Name: Jiangsu Datang International Jintan Gas Turbine Cogeneration Project
1.2 The name of the target: fully insulated cast bus, condensate removal iron filtration equipment, rain water pump
1.3 Source of Funds: 20% Capital Self-raised + 80% Business Financing
1.4 Construction Site: Jintan Economic Development Zone, Jiangsu Province
1.5 Construction Scale: 2 sets of 400MW (F class) gas-steam combined cycle cogeneration units
1.6 Planning Period: 16 months
1.7 Project Description: Two sets of 400MW (F class) gas-steam combined cycle cogeneration units will be constructed in this period.
1.8 Tenderee: Jiangsu Datang International Jintan Thermal Power Co., Ltd.
1.10 Bidding scope: (Indicate the scope, content, scale, quantity, technical specifications, delivery time, delivery method, delivery place requirements, etc. of the tender for this tender)
Tender number
The name of the target
Tender scope
unit
Quantity
delivery time
Delivery Method
trading locations
Note
CWEME-JSJT-1611-FJ010
Fully insulated pouring bus
Type: outdoor/indoor three-phase one-piece insulation cast closed bus
set
set
1
2017.04.01
Car delivery
Construction Site
It meets the requirements for high plant preparation, two-unit high-plant changes, and turbine excitation-varying cast bus installations.
Rated voltage:
6kV (factory electricity bus)
1.2kV (AC Excitation Bus)
0.6kV (DC excitation bus)
Design maximum voltage: 7.2kV
Rated current: 2000A
CWEME-JSJT-1611-FJ011
Condensate iron removal filter
Iron filter
set
2
2017.05.01
Car delivery
on site
Start filter
set
2
Run filter
set
2
Pipes and fittings
set
2
valve
set
2
CWEME-JSJT-1611-FJ012
Vertical mixed flow pump
Q=2893m3/h, H=9.0m
set
2
2017.05.01
Car delivery
on site
Q=1088m3/h, H=9.0m
set
2
2, bidder qualification requirements
2.1 Qualified bidders and their bid products must meet the following general qualification requirements:
2.1.1 Bidders must be legal entities or other organizations registered in the territory of the People's Republic of China.
2.1.2 The bidder shall have the manufacturing capabilities of the corresponding equipment, and shall have the ability to undertake the tendering project in terms of personnel, equipment, funds, etc., as well as the inspection capability of products, components, components, materials and accessories. Unless otherwise specified, these qualifications, qualifications and performance are all rights and interests of the bidder’s own company.
2.1.3 Designed and manufactured products with the same structure, the same type, the same or more technical specifications as the bid product. Under the same or more strict normative conditions as the specification, the quantity or supply quantity of the product and its successful operation time meet the requirements of the tenderer. If there are different types of equipment in the same tender section, the applicant must meet the eligibility requirements for each category of equipment in the tender section.
2.1.4 Obtain valid product testing and appraisal reports issued by international authoritative organizations or product inspection and testing agencies authorized and licensed by the State.
2.1.5 Bidders have good bank credit and business reputation, are not being ordered to suspend business or go bankrupt, and assets have not been restructured, taken over and frozen.
2.1.6 In the past three years, during the fulfillment of the supply contract, after-sales service and product operation, there has been no breach of contract after the successful bidder, serious breach of contract provisions during the performance process, and major quality problems in the product supply.
2.1.7 is not suspended or canceled.
2.1.8 The tender does not accept the agent's bid; this tender does not accept the Commonwealth bid.
2.1.9 Each potential bidder can purchase part or all of the tender documents of the tender for participation in the bidding.
2.1.10 Legal persons and other organizations that have a stake in the bidder’s impartiality may not influence bids; the person in charge of the unit is the same person or a different unit that has a controlling or managerial relationship, and may not participate in the bid for the same tender or may not be subdivided. The tender for the same tender item of the segment.
2.2 Qualified bidders and their bid products must meet the requirements for the special qualifications of the corresponding equipment for tendering. The requirements, data, and status of the requirements for the special qualifications of various types of equipment are listed in the appendix “Special Qualification Performance Requirementsâ€. Bidder special qualification performance requirements
No.
The name of the target
Qualification requirements
Specific requirements
1
Fully insulated pouring bus
registered capital
25 million yuan and above.
Production License
Have.
Certification certificate
The bidding company has passed the ISO9000 quality management system certification, and its certificate is within the validity period.
Delivery performance
Within the last 5 years (calculated by the deadline for bidding), it has the performance of sales, design, and manufacture of four sets of three-phase integrated insulation cast bus equipment with the same or higher capacity units. (Provide proof of contract).
Performance
In the last 5 years (calculated by the deadline for bid submission), the bidder has 2 sets of fully insulated cast busbar equipment with the same or higher capacity units for more than 2 years of good operation experience. No major equipment quality problems have been found or have been valid during installation and commissioning operations. Improvement measures. (provide relevant operation certificate).
2
Condensate iron removal filter
registered capital
10 million yuan.
Production License
Have.
Certification certificate
Has a complete quality assurance system and certification of its quality certification
Delivery performance
The company has sales, design, and manufacture of four sets of equipment units with the same or higher capacity.
Performance
In the past five years, the bidder has 2 sets of condensate removal equipment for the same or higher capacity units. Technical Specifications for Equipment for Filtration of Iron Removal Filters More than 2 years of good operation experience. No major equipment quality problems have been found or effective during installation and commissioning operations. improvement measures.
3
Rain pump
registered capital
10 million yuan.
Production License
Have.
Delivery performance
The company has sales, design, and manufacture of four sets of equipment units with the same or higher capacity.
Performance
In the past five years, bidders have 2 sets of rainwater pump specifications for the same or higher capacity units. The equipment has more than 2 years of good operating experience. No major equipment quality problems or effective improvement measures have been found during installation and commissioning.
3, access to tender documents
3.1 Method of Obtaining: Any bidder who intends to participate in this bidding, (.)
3.2 Invite bidders who have the intention to meet the above qualification requirements to register. Registration time: November 16th, 2016 to November 24th, 17:00, 9:00am to 11:30am, 13:30am to 17:00pm (except holidays), overdue will not be accepted.
4, submission of bid documents
4.1 Deadline for Submitting Bids Documents (Bid Deadline, the same below): 10:00, December 06, 2016 (Tentative, subject to follow-up notice of bid opening).
4.2 Place of delivery: Beijing (Specific opening location will be confirmed by follow-up bid opening notice).
4.3 Delivery method: The bidding documents shall be sealed as required and delivered to the designated place. If the goods are delivered late or not delivered to the designated place or are not sealed as required, the tenderee will not accept it.
4.4 Other submission methods: None.
Contact: Zhang Jie
Mobile:
phone
fax
E-mail:
In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.
Fiber Optic Components,Parts Of Fiber Optic Cable,Fibre Optic Connector,Parts Of Optical Fiber
Cixi Dani Plastic Products Co.,Ltd , https://www.danifiberoptic.com